Printing large models on a Bambu Lab A1 mini, A1, P1S, X1C or H2D
A Bambu Lab A1 mini prints up to 180 mm in each direction, an A1 up to 256 mm, a P1S or X1 Carbon 256 × 256 × 250 mm, and an H2D 350 × 320 × 325 mm. Anything larger is printed in parts: a 400 mm ball needs 8 parts on an A1 and 27 on an A1 mini.
Build volumes
| Printer | Build volume (mm) |
|---|---|
| Bambu Lab A1 mini | 180 × 180 × 180 |
| Bambu Lab A1 | 256 × 256 × 256 |
| Bambu Lab P1S | 256 × 256 × 250 |
| Bambu Lab X1 Carbon | 256 × 256 × 250 |
| Bambu Lab H2S | 340 × 320 × 340 |
| Bambu Lab H2D | 350 × 320 × 325 |
How many parts does a large model need?
These are the counts CadSplit gives for its three example models, using the fewest cuts that make every part fit, with dovetail seams:
| Model | A1 mini (180 mm) | A1 or P1S (256 mm) | H2D or H2S (320 mm and up) |
|---|---|---|---|
| Ball, 400 mm across | 27 parts | 8 parts | 8 parts |
| Toy car, 528 mm long | 16 parts | 6 parts | 2 parts |
| Sculpture, 542 mm long and 517 mm tall | 48 parts | 19 parts | 9 parts |
The step from an A1 mini to an A1 makes a big difference: the same ball goes from 27 parts to 8.
Getting the parts into Bambu Studio
Bambu Studio projects can hold many plates. The tidy way to print a split model is one part per plate, each lying on its flattest face.
- Open the model in CadSplit and pick your printer. It is found automatically if Bambu Studio is installed.
- Check the parts on their plates. Everything green fits.
- Press Send to Bambu Studio. The project opens with one part on each plate, ready to slice.
The same works with OrcaSlicer. For other slicers, save a 3MF or a zip of STL files.
Doing it by hand in Bambu Studio
Bambu Studio has a cut tool with connectors. Select the model, open Cut, place the plane, choose a connector and cut. Repeat for each part that is still too big, then spread the parts over plates. It is fine for a single cut and gets slow for more.
Questions
What is the biggest thing a Bambu Lab A1 can print?
One part can be up to 256 × 256 × 256 mm. Larger models are printed in several parts and joined.
Can the A1 mini print large models?
Yes, in more parts. Its build volume is 180 × 180 × 180 mm, so a 400 mm ball needs 27 parts where an A1 needs 8.
Does CadSplit work with Bambu Studio?
Yes. It opens the split model in Bambu Studio with one part on each plate.