CadSplit

How to split an STL into parts that fit your print bed

To split an STL into parts that fit your print bed, cut it along one or more planes so that every part is smaller than the build volume, then add connectors so the parts line up. Slicers have a cut tool for doing this one plane at a time. CadSplit does all the cuts, joints and plate layout in one step.

Option 1: the cut tool in your slicer

Bambu Studio, OrcaSlicer and PrusaSlicer can cut a model along a plane and add connectors such as plugs or dowels.

  1. Select the model and open the cut tool.
  2. Move the plane to where you want the seam and pick a connector.
  3. Cut, then repeat on each part that is still too big.
  4. Move every part to its own plate and turn it so a flat face is down.

This works well for one or two cuts. With several cuts in more than one direction it gets slow, because each cut is placed by hand and connectors from crossing cuts can collide.

Option 2: a CAD or mesh program

If you have the original CAD file, you can split the body there and model the joints yourself. For a mesh, programs such as Blender or Meshmixer can cut with a plane. You get full control, and you do all the work: clearances, joint shapes, numbering and layout.

Option 3: CadSplit

CadSplit is a Mac app made for this one job.

  1. Drop in an STL, 3MF, OBJ or STEP file. Small faults in the mesh are repaired for you.
  2. Pick your printer. The model comes back cut into the fewest parts that fit, each on its own plate. Green fits, red is too big.
  3. Choose a seam (straight, puzzle, dovetail or zigzag) and a join (pins and glue, clips, M3 screws or magnets). Drag any cut to move it.
  4. Send it to Bambu Studio or OrcaSlicer with one part per plate, or save a 3MF or a zip of STL files for another slicer.

It also engraves a number on a hidden face of every part and plays the assembly order step by step.

Things that go wrong

Download CadSplit Free to try: drop a model and see it split. To send it to your printer you buy a license once, and use it for every model after that.

Questions

Can I split an STL without CAD software?

Yes. The cut tool in Bambu Studio, OrcaSlicer or PrusaSlicer splits a mesh along a plane, and CadSplit splits it automatically for your printer.

What file types can CadSplit split?

STL, 3MF, OBJ and STEP.

Does CadSplit upload my model?

No. The model is opened and split on your own computer. There is no account and nothing is uploaded.

More guides